Tuesday, September 17, 2013

2014 Calendar of Our Designs

Our 2014 calendar is now at the printers and we will have the first stocks ready for shipping in a couple of weeks. Get your orders in and we will ship as soon as they come in, well in time for you to use as Christmas gifts or to hang on your wall come January 1st. Order here.

We have a nice selection of photos again this year. Here are the cover photo and a few months as samples of what it contains.
Cover of our 2014 Calendar
January
May
July
September
Thank you to all who have allowed us to use your photos. For other builders who are not featured, we have already started to collect photos for our 2015 calender. This is a good opportunity to show off what you have achieved, so please send them to me by email.

We have changed suppliers this year, in the interests of keeping the price reasonable. The supplier that we used in the past has hiked their prices way up and would have necessitated a considerable increase. With the new supplier we can hold the price at the same level as the past two years.

To see our range of boat designs, please go to http://dixdesign.com/ .

Tuesday, September 10, 2013

New Plywood Dix 43 Launched

Back in the late 1990's Roy McBride of Hout Bay, South Africa, asked me if he could build my steel Dix 43 design in plywood. He had been very impressed by my radius chine plywood method that I developed to build my Didi 38 "Black Cat". He built his boat from the steel plan set assisted by some new drawings detailing important aspects that I supplied. The resulting boat was "Flying Cloud", which resides at Hout Bay Yacht Club.
Roy McBride's "Flying Cloud", built to a very nice standard.
I have never added the Dix 43 to our plywood design list because it is not a fully detailed plywood design. But it does make a really nice boat in that material when a builder wants to build from plywood. Another of these boats has been launched in South Africa, this one built by Gert Bruwer of Saldanha Bay on the West Coast. He has built the aft cockpit version, whereas "Flying Cloud" has a customised deck that is a mixture of our centre cockpit and pilothouse versions.
Gert Bruwer's Dix 43 "Scylla".
Gert has been a very loyal customer. He has previously built a steel boat to this same design as well as a steel Dix 38 and a plywood Didi 34 . He preferred the radius chine plywood building method, so selected it for this latest boat.

"Scylla" on hull-turning day. Much of the interior is already in.
Galley of "Scylla", traditional finish of white with hardwood trim.
"Scylla" is sailing well but I don't yet have sailing photos of her.

To see our full range of designs, go to http://dixdesign.com/.

Monday, September 9, 2013

Hitting the Nail on the Head with CC19

We all know what it means to "hit the nail on the head". Taken literally, it is so satisfying to hit a nail so square and hard that it drives a long way into the timber. Just a few such blows and it is home, securing whatever its destiny in life was to hold in its given place. Taken figuratively it means that we have expressed an idea very clearly and in a way that resonates with others.

In just the same way, it is possible to design something that is just perfect, that we would not like to do any differently if we were to start again from the beginning, even if armed with the experience that came from the use of that product. A designer can and should get tremendous satisfaction from his/her involvement in the process whenever that nail is so squarely struck on the head. I have been lucky enough to find that nail a few times.

The Cape Cutter 19 is just such a design. I really would not change anything at all about that little boat. I have not sailed them enough and hope that I will get many more opportunities to sail them. The sailing that I have done has always impressed me with the extraordinary speed, handling and ability of this little boat.
Two Cape Cutter 19s drying out in UK.
 It is not a racing boat, so don't expect it to plane downwind like a sportboat. It is a little cruiser that can sometimes make you feel like you can take on the sportboats. Take it out in light conditions and it will sail past virtually any other cruiser or cruiser/racer of similar size, as well as taking out many much larger boats that should be a whole lot faster. It is oh so satisfying to sail past a boat that looks much faster but isn't.

It is not only a light-weather boat though. Remember, I grew up sailing the waters of the Cape of Good Hope and spent most of my life sailing there. Most circumnavigators tackle the Southern tip of Africa with great trepidation because of the often violent wind and sea conditions. For those who live there, those are the conditions that are given, so they have to be dealt with. I designed the Cape Cutter 19 to sail those waters safely, with due diligence by the skipper, of course.

There is a really nice independent review of the CC19 and it's bigger sisters on the SA Yacht Blog . It includes observations by the author of boats to these designs that he has seen in action around the Cape of Good Hope and how they have managed in those conditions.

These boats are loved by their owners and they are very sad to part with them. One such owner is Russell Eden in UK, who sold his CC19 this past weekend. I received these messages from Russell, repeated with his permission.

"I sold my Cape Cutter 19 today after three years of ownership.

She was number 47, built in SA. I wanted to personally thank you for creating such a beautiful craft. Each and every day I sailed her I had people approach me to talk. People would sail/motor over to take photos and video. People offered me money for her, there, on the spot.

I've only sold her because my wife says she will come sailing with me more often if we had a boat with full standing room and a heads. I would have kept her forever otherwise.

I'm sitting here now wondering what I've done; I've let go perhaps the most wonderful piece of property I've ever owned. No doubt I'll get over it in time, but I doubt I'll ever own anything quite so easy on the eye, or so wonderful on the water.

Thank you for designing her."


Russell followed up with:-

"I really meant it too. You designed something which grown men cry after.

 That said, it was only ever the white ones I lusted after. I think you need to be able to see the lapstrake, which you can't always do on the darker hulls."


Russell Eden sailing his CC19 "Zephyr".
Thank you Russell, for your kind words. I get great satisfaction from them.

The Cape Cutter 19 is a GRP production boat built in UK by Honnor Marine . It can also be built from plywood from plans that we supply at http://dixdesign.com/ . There you can see our wide range of other designs as well.