Great Chesapeake Bay Schooner Race 2014

The Great Chesapeake Bay Schooner Race is held annually, with schooners of all types and sizes racing each other from the Bay Bridge North of Annapolis to the southern end of Chesapeake Bay. Starting at 13h30 on Thursday 16th October, this is the 25th running of the annual race, which was started by the late Capt. Laine Briggs.This is really two parties, one in Baltimore, Maryland, the other in Portsmouth, Virginia, linked by a yacht race.

I have sailed in this race twice before, on steel boats that I had designed. In 2004 it was on the 60ft gaff schooner "Ancilla II", then owned by Renny Barnes. About 5 or 6 years later I did it on the  Hout Bay 40 "Adventure" that was owned by Charley Holmes.

This year I will sail with Dan Hall on his GRP staysail schooner-rigged Shearwater 45 "Apella". She was built in Cape Town by Patrick Fraser. Patrick commissioned the Shearwater 45 design and built two of them, one for himself and the other for his colleague Denis Colclough. The one that we will sail was the boat owned by Denis and was originally named "Wave Maiden".

"Apella", snapped by solo-circumnavigator Ant Steward at a recent
chance meeting when leaving Newport RI.

The Shearwater 45 has a modern underbody below her classic good looks. It allows these boats to show surprising speed under most wind conditions.

The two schooners were both fitted out with very distinctive colours and detailing, styled after the very luxurious private Pullman carriages that were used by wealthy families to travel on the railroads of North America.

Sistership "Moonbeam" out of the water, showing underbody.

Gorgeous interior of "Apella", looking aft

Looking forward.

The cutter-rigged version of this design won two boat of the year awards at the 2000 Annapolis Sailboat Show. Read more about the Shearwater 45 in an earlier blog post.

Visit our website at http://dixdesign.com/.

Didi 950 Progress & Lifting Keel Option

Mike Vermeersch in Ravenna Ohio turned over his Didi 950 hull a couple of weeks ago and sent me a video of the process.  He turned the hull with the help of a few friends, using the spit roast method and a pair of engine hoists.

With the hull settled in her new cradle, Mike has settled into doing the epoxy fillets and coatings, ahead of starting on the interior joinery.

Epoxy coatings progressing on Mike's Didi 950

While builders have been making material progress with their builds, I have been doing the drawings that detail the lifting keel version for Fred Grimminck. Fred is building his Didi 950 in Queensland, Australia. He has also turned his hull in the past fortnight.

The lifting keel version uses a keel support box of identical footprint to that of the fixed keel version. The difference is that the keel has to slide through where the motor sits in the fixed keel boat, so the motor has relocated to below the front of the cockpit and has a saildrive. The keel support box for this version has the casing built into it, with a flange at the top edge for bolting the keel securely in the down position. In the raised position, the keel is at approximately the same level as the bottom of the rudders. Draft is 2.35m (7'9") with the keel down and 1.15m (3'9") with the keel up.

The keel is lifted by means of a tackle, with the tail led to a dedicated winch that is recessed into the galley counter. This is a simple system, without the waterproofing and complication issues of leading it to a cabin roof winch.

Accommodation of the lifting keel version of the Didi 950

This lifting keel offers Didi 950 owners the possibility of having a racer or a performance cruiser, with deep draft, that can live on much shallower moorings or can access shallow anchorages.

To see our full range of designs to a wide range of concepts and materials, please go to http://dixdesign.com/.

Didi Mini Mk3 in Vancouver BC

Mark Paterson lives in Burnaby, British Columbia, in Canada. In 2010 he was one of the first customers to buy plans for the Didi Mini Mk3. His boat is nearing completion and he expects to launch before the end of this year.

I met Mark in 2011 when I was a speaker at the Metal Boat Festival in Anacortes, WA. He drove down from Canada to meet, a pleasant surprise for me seeing as he was building a plywood boat and I was there to discuss steel and aluminium boats with people who work with cold and hard materials, grinders and sand-blasters.

A few weeks ago, when I was a presenter at the Wooden Boat Festival in Port Townsend, WA, Mark came down again. He caught up with me at the Didi Cruise-Mini that was being exhibited by David Blessing. Mark gave me a flash drive loaded with photos of his project, from start through to the present nearly complete stage. I will post photos of his project over the next few weeks.

Mark's Didi Mini Mk 3 with hardware going on.

 Mark has done some exquisite work while building his boat, work of which any builder would be rightfully proud. Some of it is above the level of expertise that I would expect from an amateur builder and is to his own detailing, modified from my drawings and made from carbon/epoxy instead of aluminium or stainless steel. The lighter weight of these items will go some way to offset the comfortable interior that he has put into his boat. I can see the influence of a wife in the interior.

Nice galley to cook up a storm in a little boat.

I won't show the early construction photos. The construction method is much like her bigger sister, the Didi 950 that is shown in posts on this blog over the past few months and I don't want to bore you with repeated info. You can access the Didi 950 posts through the archive list at left. Instead I will focus on the more interesting aspects of Mark's build. Watch for those posts over the next few weeks.

To see more of this design and others in our portfolio, please visit http://dixdesign.com/