Wooden Boat Festival, Port Townsend

The Wooden Boat Festival in Port Townsend WA ended a week ago. Two days of off-and-on light drizzle washed the smoke from the wild fires out of the air and Sunday turned into a gorgeous day with lots of visitors. There were three boat of our design on display.

The Didi Cruise-Mini "Segue" has been at the Festival many times. Her owners, David and Nancy Blessing, have become good friends of mine over the past few years and hosted me in their beautiful home in Port Ludlow. Their boat was built by the Northwest School of Wooden Boat Building in Port Hadlock. The Festival gave me the opportunity to view some of the beautiful boats built by the school and also on display. I also spent a few pleasant hours in the company of Executive Director Betsy Davis and some of the many people who make this school a valuable resource of the boating community. The school may be available to build our smaller designs, up to about 21ft, but the bigger boats would not fit into the requirements of their programs.

Didi Cruise-Mini "Segue".

The Cape Henry 21 "Slough Coot" is owned by Michael and Jody Baccellieri of Portland OR. Their boat attracted an endless stream of visitors to visit aboard and talk about her. Michael and Jody had spent the previous 2 weeks cruising the beautiful islands and anchorages of Puget Sound and were very happy to chat about their capable little vessel.

Michael and Jody aboard their Cape Henry 21 "Slough Coot".

The Didi Mini Mk3 "Voodoo Child" was built by amateur Mark Paterson in Vancouver BC, to an extremely high standard that rivals the best produced by many professional boatyards. Visitors who talked to me after being aboard "Voodoo Child" all spoke of the incredible standard of finish and the many features that Mark built into his boat. She is very well-equipped, including carbon mast, boom and sprit. We took her out to sail in the Friday race, unfortunately into the worst possible conditions for a Mini 650 to show her paces. We had a boat, designed for windy downwind racing and trans-ocean passage-making, in a sometimes windless around-the-cans race where contrary current was at times faster than boat speed. I will have to sail on her another time to experience her speed in her own conditions.

Didi Mini Mk3 "Voodoo Child".

I had flown to the Pacific Northwest via Portland so that I could visit friends in that area. One was the owner of a Lotus Europa similar to my own, to help him to sort out some problems. That done, we took it for a spin on Vancouver WA roads, giving me even more appreciation for my own car, which I had resurrected from a lifeless wreck over a 5-year rebuild. Just a few more jobs to do to complete the total body-off restoration. People wonder when I walk up to this tiny car how a tall guy like me can fit into a car with the roof below waist level. The saying is that you don't get into a Lotus, you put it on like a pair of trousers, one leg at a time. 😊

The roof of my Lotus comes only to the bottom of the windows of my wife's Chev Sonic compact.  Seen here with my Ford Windstar and son-in-law's jacked SUV for contrast with my "toy" car.

To see our full range of boat designs, go to our main website or our mobile website.

Wooden Boat Festival, Port Townsend

That season is coming around again, time for the Wooden Boat Festival in the beautiful little Pacific Northwest town of Port Townsend, WA. This is the 41st edition of one of the most popular wooden boat events in the world, with hundreds of wooden boats on show and dozens of presentations on a wide range of subjects of interest to boating people. Dates are 8th to 10th September 2017. The festival website is not yet fully functional but that will come soon.

Among those many boats will be three of our 21ft plywood sailboats, all different, which can be visited on the docks.

David Blessing's Didi Cruise-Mini "Segue". This is the detuned cruising version of our Didi Mini single-handed trans-Atlantic raceboat.

Michael Baccellieri's Cape Henry 21, "Slough Coot". She was built with some deviations from our design but the current owner is working to get her closer to the original drawings.

Mark Paterson's Didi Mini Mk3 "Voodoo Child". This is the full racing version of our Mini-Transat racer, with the newer hull shape and rig. 

I will also be taking part in the presentations. I will participate in the Designers' Forum, along with other boat designers, moderated by Jay Benford. This is from 12h00 to 13h00 on Friday 8th in the Cascade Room. Bring your boat design and construction questions to this session and observe how diverse the range of opinions and solutions can be among designers with different backgrounds and design styles. This is normally a very interesting gathering.

I will have my own session in the Cascade Room from 09h30 to 10h30 on Sunday 10th. My presentation is titled "Surviving a Capsize on the Ocean". Nobody can guarantee who will survive an ocean capsize but this presentation is aimed at making boaters aware of the many factors that are working together to reduce their chances of escaping alive from a capsized boat. Armed with that knowledge, they will be better prepared to choose the best options if they do ever have the misfortune of being inside or under an inverted boat.

To see our range of boat designs, go to our main website or our mobile website.

Wooden Boat Festival, Port Townsend

I will be at the Wooden Boat Festival at Port Townsend, in Washington State, next weekend. This is the 39th edition of this annual Festival, which is claimed to be the biggest of the type in the world. With hundreds of boats on view on land and in the water, many suppliers exhibiting their wares, boatbuilding demonstrations, a very full schedule of seminars and live shows in the evenings, there is plenty to keep lovers of boats and the water occupied for a day or more. Add in the wide array of food and beverages served by vendors at the Festival and nearby restaurants and you have the ingredients for a wonderful weekend to help wind down the summer.

Didi Cruise-Mini "Seque" on the 2014 Wooden Boat Festival.

The Festival runs from Friday 11th through to Sunday 13th September. I will be participating in one shared seminar session and be hosting two of my own. For those who would like to catch one or more of them, here are the times and locations.

1) Yacht Designer Panel Q&A. Moderated by Jay Benford, we designers will give our opinions in response to whatever boat-related questions you throw at us. This type of seminar shows that we don't always agree on the best way to do something. Just as well, or all boats would look alike. Friday 11th 2:45 to 4:30 in Maritime East "Cascade" room.

2) Plywood Boat Construction. In this PowerPoint-illustrated seminar, I discuss the various plywood boat construction methods for which I design and have designed in the past, showing the details used and covering the advantages or disadvantages of the type. Saturday 12th 2:30 to 3:30pm in the Explorer Room.

3) Plywood Kits for Larger Boats. Most people think of kit boats as applicable to dinghies and other small open boats, not for much bigger ocean cruisers and racers. In this PowerPoint-illustrated seminar I show a wide range of plywood kit boat options, from trailer-sailers to cruiser/racers, traditional to modern craft and both mono- and multihulls. Sunday 13th 1:15 to 2:15pm in Maritime West "Olympic" room.

If you live in the Pacific Northwest or will be visiting next weekend, spend some quality time with boats and boating people at the Wooden Boat Festival

Our main website - http://dixdesign.com/
Our mobile website - http://dixdesign.com/mobile

Wooden Boat Festival 2015

The 2015 edition of the Wooden Boat Festival in Port Townsend, Washington, happens 11-13 September. Organised by the Northwest Maritime Center, it is their premier event of the year, attracting hundreds of wooden boats of all description, a wide array of exhibits and with 120 speaker sessions on boating subjects.

Some of the boats at the 2014 Festival, Didi Cruise-Mini in right foreground.

I will be taking part in three sessions, one on each day of the Festival.

Friday 11th - 2:45pm - Yacht Designers Panel Q&A - six designers to field your questions about boats and designing them. A session like this highlights the variety of opinions held by different designers on boating issues.

Saturday 12th - 2:30pm - Plywood Boatbuilding Methods - PowerPoint presentation showing information and details of the methods for which I design, illustrated with drawings and photos of my own projects and those of amateurs who have built these designs.

Sunday 13th - 1:15pm - Plywood Kits for Larger Boats - PowerPoint presentation about constructing kit boats that are larger than open dinghies and kayaks. This will cover boats from a 21ft lapstrake plywood trailer-sailer through to a 55ft radius chine plywood cruising catamaran.

Paper Jet "Water Rocket" at the 2014 Festival

The Didi Cruise-Mini "Segue" of David Blessing will be there among the on-the-water boats but I don't know yet what other of my boats will be there.

When not involved with other things, I am happy to meet with builders or anyone interested in my designs. If you can't find me then visit the Didi Cruise-Mini. Whoever is in attandance at the boat should know where I am and how to contact me.

If you are in the Pacific Northwest, or able to get there, this is an event worthwhile visiting.

To see our designs, visit our main website or our mobile website.