Road Trip to Sail the Didi 29 Retro "Arabella"

It was my 70th birthday 2 weeks ago and I was surprised by my family with a totally unexpected visit by my sister Dorothy and her daughter Robynne from across the Atlantic, come to participate in the festivities and to help make it a very special occasion. Winding down Dorothy's trip, she and I made a brief road trip to North Carolina. We started off down the Outer banks, where I hoped to find some decent surf. The weather stymied that one with strong onshore winds, so we wasted little time feeling sand between our toes, visited the Graveyard of the Atlantic Museum in Hatteras and arrived at the ferry dock to board for Ocracoke to find rows and rows of cars waiting ahead of us.

Innocent us, we did not expect a flood of people to be visiting this tiny barrier island. I expected to arrive at the ferry dock and be boarded 15-30 minutes later, then a short crossing, time to get lunch on the tiny island before boarding our reserved ferry to Cedar Island. Wrong. After sitting in the queue for a long time, the very accommodating NC Ferry staff let us jump the line to catch the next ferry, or we were not going to make out 4pm ferry. That short crossing to Ocracoke is actually about 4 or 5 times the straight-line distance because the ferry has to wind back-and-forth through the channels.

Satellite view of Ocracoke Inlet, Courtesy Google Earth. The Hatteras ferry dock at extreme right, Ocracoke ferry dock at extreme left. The sand banks and channels move around and the ferries have to zig-zag through them. 

So, we had a drive-through tour that really didn't do justice to the very cute little town of Ocracoke, arriving in time to check in for our next ferry, without lunch. The ferry route to Cedar Island was more direct and parallel to the barrier islands, in deep water.The main entertainment was a variety of seabirds soaring behind us and looking for food to be churned up by the propellers or tossed in the air by passengers.

Once on land we saw the results of the coastal areas that were devastated by Hurricanes Florence and Michael last year. Homes destroyed, most that survived now being jacked up 6-8ft to get them above future flooding.Trees still on top of some homes, no longer habitable. And our hotel still undergoing reconstruction, with water service disrupted at times and cold water coming out of the hot taps. But the beds were new and very comfortable, so we got a good night's sleep. In the morning, a short ferry ride and drive to a marina in Oriental.

"Arabella" is very pretty. She was built by professional boatbuilder Bruce Mierke as his personal sailboat, to our Didi 29 Retro design. He customised his build to suit his own needs, so she has a shorter cabin and some different detailing.

"Arabella" in her dock, retractable bowsprit withdrawn

Lifting keel in raised position, hauled up by a tackle system led to the cabintop winch.

Lifting rudder in a casette. Bruce modified this from my original design, to give some steering when the rudder is partially raised. There is an outboard motor well but Bruce has an electric pod drive installed.

With the short cabin, Bruce has kept his halliards at the mast .

The bowsprit retracts and pivots on an inboard traveller on the foredeck, with control lines led aft to the cockpit.

"Arabella" hard on the wind.

Very neat high-peaked gaff rig with nicely-shaped mainsail. All spars are carbon.

So, how did she sail? Wind was very light, around 4-5 knots most of the time. On the flat water that we had, she sailed close to the wind at 3.5-4 knots, with little wake and an easy helm. She cut through the occasional powerboat wakes of the ICW with little fuss or loss of speed. Once cracked off, we pushed out the bowsprit, set the top-down roller-furled asymmetrical off the end and rolled away the jib to allow the spinnaker to breathe.

She powered up and reached at just a touch under the apparent wind speed, topping out at more than 8 knots boat speed in 9 knots of apparent wind. That put her boat speed at well above the true wind speed in which we were sailing. She did this with no fuss and very easy control. The speed gave the feeling that the wind had picked up but with the bag stowed and back on the wind under main and jib, we still had the same light breeze as before. She just gets up and goes. She will reel off the miles if used as a small cruiser.

"Arabella" has the smaller of the two gaff rigs that I drew. This one is suitable for most small crews, for racing or cruising. The other gaff rig is larger and will need a larger and more experienced crew. We also have a Marconi rig with square-top mainsail.

See our full range of designs on our main website or our mobile website.

Cape Henry 21 & Kits in Australia

The most recent Cape Henry 21 launch was in Adelaide, Australia. "Sealion" is beautiful, built by Ron Jesche, and painted a very pretty blue. Ron is a professional boatbuilder with other boatbuilding projects behind him but most boats to this design are built by amateurs. With more than 100 afloat or in build around the world, this is our most popular plywood traditional sailboat design.

Ron Jesche exhibiting "Sealion" at the Geelong Wooden Boat Festival.

 Ron made a lovely job of the build, both inside and out, with quality joinery. The bright-finished details against white surfaces are traditional finishes for classic boats and create a bright and airy interior.

Pretty detailing, nice finishes. The slatted liners are comfortable backrests for the settees.

The raised sheer and flush deck give a comfortable and spacious interior.

Afloat and waiting for her sails.

Ron made some custom changes to his boat. One of them was to add a small diesel motor under the front of the cockpit to replace the standard outboard motor in an outboard well. It fits in neatly, with access through hatches in the cockpit sole and bulkhead. Although the diesel motor is a bit heavier than the outboard that it replaces, it is closer to the centre of gravity of the boat, so has little effect on flotation.

Cockpit hatches to access engine and shaft seal.

Access openings in bulkheads around the engine.

Ron launched on Christmas eve and had the first sail as a Christmas present. Since then he has sailed her in a wide variety of conditions on all points of sail and tested her for heaving to. He had previously sailed the smaller sister, Cape Cutter 19, and declared them both to be fast, capable and without vices.

"Sealion" romping in a friendly summer breeze, sailing as a cutter with Yankee and staysail.

A few days ago he sent this photo, taken while sailing in light breeze. It was his first outing with Genoa and main, sailing as a sloop. He discovered just how fast these little boats are in light winds.

Reaching at 6.1 knots boat speed in 7.8 knots apparent breeze.

While building his Cape Henry 21, Ron Jesche agreed to work as our agent in Australia and since then we have expanded it to include CNC kits for our plywood designs. He is well placed to represent us at boat shows and in the plans and kit markets. To contact Ron Jesche, go to his Stainless Boatworks website at https://stainlessboatworks.com.au/.

To see more of this design or others in our wide range, go to our main website or our mobile website.

Cape Henry 21

I was surprised a few weeks ago to hear that a photo of a Cape Henry 21 is on the front cover of the June issue of Sailing magazine. It was another week before I had a copy in my hands to see for myself . It really is a beautiful Billy Black photo of "Mehala" in drifting conditions on Long Island Sound. It was taken while we were waiting for some breeze to do a sail test for Wooden Boat magazine in June 2009.

I contacted the staff of Sailing to thank them and have also sent them all that is needed for a design review. Watch for that in an upcoming issue.

"Mehala" was owner-built by South African Mike Smith, who lives in Darien, Connecticut. He berths her at Norwalk Yacht Club on Long Island Sound, where he is a past commodore.

Mike did a very nice job of building "Mehala". She is very pretty and sails well (not that I was able to experience her sailing ability, the breeze never did excede about 2 knots).

I was on "Mehala" with Dan Segal, who was commissioned by Wooden Boat to author their sail test. He gave her an excellent review, which covers 6 full pages of the July/August issue of Wooden Boat, currently on the shelves. My thanks go to Dan Segal and the staff at Wooden Boat for such a wonderful review and to Mike Smith for allowing us the use of "Mehala".