Cape Henry 21 & Kits in Australia

The most recent Cape Henry 21 launch was in Adelaide, Australia. "Sealion" is beautiful, built by Ron Jesche, and painted a very pretty blue. Ron is a professional boatbuilder with other boatbuilding projects behind him but most boats to this design are built by amateurs. With more than 100 afloat or in build around the world, this is our most popular plywood traditional sailboat design.

Ron Jesche exhibiting "Sealion" at the Geelong Wooden Boat Festival.

 Ron made a lovely job of the build, both inside and out, with quality joinery. The bright-finished details against white surfaces are traditional finishes for classic boats and create a bright and airy interior.

Pretty detailing, nice finishes. The slatted liners are comfortable backrests for the settees.

The raised sheer and flush deck give a comfortable and spacious interior.

Afloat and waiting for her sails.

Ron made some custom changes to his boat. One of them was to add a small diesel motor under the front of the cockpit to replace the standard outboard motor in an outboard well. It fits in neatly, with access through hatches in the cockpit sole and bulkhead. Although the diesel motor is a bit heavier than the outboard that it replaces, it is closer to the centre of gravity of the boat, so has little effect on flotation.

Cockpit hatches to access engine and shaft seal.

Access openings in bulkheads around the engine.

Ron launched on Christmas eve and had the first sail as a Christmas present. Since then he has sailed her in a wide variety of conditions on all points of sail and tested her for heaving to. He had previously sailed the smaller sister, Cape Cutter 19, and declared them both to be fast, capable and without vices.

"Sealion" romping in a friendly summer breeze, sailing as a cutter with Yankee and staysail.

A few days ago he sent this photo, taken while sailing in light breeze. It was his first outing with Genoa and main, sailing as a sloop. He discovered just how fast these little boats are in light winds.

Reaching at 6.1 knots boat speed in 7.8 knots apparent breeze.

While building his Cape Henry 21, Ron Jesche agreed to work as our agent in Australia and since then we have expanded it to include CNC kits for our plywood designs. He is well placed to represent us at boat shows and in the plans and kit markets. To contact Ron Jesche, go to his Stainless Boatworks website at https://stainlessboatworks.com.au/.

To see more of this design or others in our wide range, go to our main website or our mobile website.

New Cape Henry 21 Launch in Australia

Ron Jesche in Adelaide, South Australia, has launched the newest build to our Cape Henry 21 design. Ron is a professional boatbuilder and owner of Stainless Boatworks. He produces high quality custom metal hardware for both power and sailing boats.

Ron bought the plans to build for his own use and has made a beautiful job of the build. He has enjoyed working with our well-detailed drawings so, part-way through the project, he took on the agency to sell our designs and plywood kits in Australia. He exhibited his nearly-complete boat at a local boat festival where it attracted considerable attention.

"Sealion" is finished in a very pretty blue, with cream decks. She was launched on Christmas Eve and went for her first sail on Christmas Day. Ron is delighted with the performance and good manners of his Christmas present to himself. His wife also enjoyed sailing on "Sealion" and feels safe on her, an important element of family boat enjoyment.

Ron's photos show what a great job he did of the build.

Nicely-detailed joinery for a pretty interior.

The work of a craftsman who is jusifiably proud of what he has produced.

Ron Jesche exhibiting "Sealion" at the boat festival.

Jon installed a small inboard diesel motor, tucked under the front of the cockpit.

Launch day, nearly ready to go sailing.

First sailing photos. Ron reported that she topped out at 5.8 knots in a 10 knot breeze.

Romping along under full cutter rig.

Ron's comments after sailing "Sealion"? What a great boat. Under 10 knots as we left and she sailed beautifully with jib and main, great steerage and control downwind in very light wind. As the wind picked up she accelerated beautifully. I am absolutely thrilled with this little boat, and can't wait to get out again tomorrow. I can't get over how well she sails. She heaves to very nicely also,and nicely mannered on all points of sail. 

Ron Jesche is well-qualified to represent us in Australia. He has general boatbuilding experience and also personal experience of building one of our most popular small cruisers, good qualities for advising potential builders about the build process and the quality of the designs that he represents. He can also supply kits for most of our plywood designs. Contact Ron via his website at Stainless Boatworks.

To date we have sold more than 100 sets of plans for the Cape Henry 21. To see our range of boat designs, go to our desktop website or our mobile website.

Cape Henry 21 Trailer-Sailer Cruising

Richard Hunter lives in Czech Republic and bought himself a Cape Henry 21 that was built in UK by amateur builder Gary Wallis. He sails it mostly on Berzdorfer See in Germany. He recently towed it 1200km to Croatia with a 1.9 litre VW Transporter to cruise in the waters of Croatia. With his wife and three teenagers on the trip, they used the van and boat as overnight accommodation en-route.

Cape Henry 21 "Ruby" reaching in great sailing conditions

Once in the water, they set off with everything needed by the 5 people and cruised for a week, without having to put into harbour to stock up. Their little cruiser took it all very well, allowing them to anchor close to shore in private spots that are inaccessible to the much bigger charter boats. Their boat is quick in the conditions normal to that area in summer, even with the big load that she was carrying. They found themselves enjoying great sailing while the big charter boats went by, motoring port-to-port.

Stowage nets for stores for 5 people.

 Richard sent me a video and photos recording their holiday, as well as some nice writing about the experience. He sums it all up in a few sentences.
 
We spent five days circumnavigating Šolta. Maybe that sounds like a long time given the size of the place, but as the years pass I find myself focussing less on what I have done, and more on the doing itself. This is the opposite of bucket listing. How many hours have we spent on a really nice tack, not how much ground have we covered, we literally couldn’t care less. If we ended up only a couple of bays along the coast, so be it. To us they were new, unexplored bays, just as lovely as any other.

Tucked in close to the shore, well away from the charter crowds.

 Richard also sent a nice video to record their holiday and has shared it with us.

`
Richard shows that bigger is not always better. a comfortable little boat like this can get you to many places that are inaccessible to bigger boats. It is also much more affordable to most people and can be taken home in the off-season to minimise ownership costs. A big benefit is being able to sail waters far from home without having to sail for days to get there. Instead, cruise the highways to the cruising grounds, then cruise the lakes, seas or lagoons of your choice at a relaxed pace, before cruising home again at highway speeds.

Thank you Richard Hunter.

To see our range of designs, please visit http://dixdesign.com/ or http://dixdesign.com/mobile.
 

Cape Cutter 19 Launch in Cape Town

Nick Kulenkampff, of Cape Town, bought plans from us in November 2013 for the Cape Cutter 19, to be built in lapstrake plywood. I only received one question from him and that was on choice of plywood for the build. A few days ago I received another email from him, with launch photos attached. He launched his boat, named "Mimi", at Royal Cape Yacht Club, in February.

In his email, Nick said "thank you for a beautiful design and also for a set of plans that were spot on. I thoroughly enjoyed the entire process." From the photos it appears that he made a pretty good job of the build, which was also quicker than most at about 15 months.

This boat is available in GRP from Cape Cutter Yachts in UK. It is the smaller sister to our popular Cape Henry 21 design.

Here are some of Nick's build photos, with explanations

Making bulkheads. These are cut from full-size Mylar patterns, included in the plans.

Transom, laminated from multiple layers of plywood.

Bulkheads and transom set up on building stocks.

Bottom skin going on. Plenty of clamps needed.

Bilge panel gong on. Keel deadwood and wood bilge keels fitted. This bilge keel is to protect the hull when aground, serving purely as a support to keep the hull skin clear of pebbles.

Forward bottom panel. Fitting this panel is the most difficult part of the build, due to the amount of twist in the panel. The twist is what forms the fine bow for good performance.

Hull epoxy-coated, primed and ready for paint.

Building the cockpit. Nick's work is very neat.

Interior, looking forward, built  before fitting the deck.

Interior, looking aft. Painting in progress.

Deck stringers glued into pre-cut slots

Painted and brightwork being done. Almost ready to get wet.

This view shows why these little boats are so quick. That fine bow works vvery well.

Launch day. The yellow boat below the bow is "Black Cat", the Didi 38 that I built.

Afloat and waiting for her rig to be set up.

Thank you, Nick, for the set of photos. She looks good and I am sure you will have many good times sailing her.

To see more of this and out other designs, visit http://dixdesign.com/.